W3230 Thermostat - Prusa Enclosure Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple W3230 Thermostat Bracket for "Original Prusa Enclosure"
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 57
- Wydruki
- 2
- Wyświetlenia
- 617
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Summary:
I use the W3230 thermostat to control my "enclosure heater".
The probe is mounted in the center of the enclosure and the W3230 thermostat is connected to an external 24VDC power supply.
You can find the thermostat on Amazon, Temu or AliExpress (about 2-15$).
Note: Be sure to order the correct voltage model.
Example: 24V when using a Prusa MK4 printer and direct connection to the printer power supply.
Printing instructions:
I used PETG with supports (Prusament Galaxy Black - matching the color of the case).
Fastening:
Use two pieces of M3x10 with nuts to attach the bracket - the same screws as for the Prusa thermometer bracket.
Note: The fit of the nuts is quite tight. Use the familiar pull-in technique with a longer screw.
Outro:
Enjoy printing and let me know if you need more information.