Trek Speed Concept Aero Bar Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 10mm riser for the aero bars on the Trek Speed Concept.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 176
- Wydruki
- 0
- Wyświetlenia
- 1434
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a small riser piece for the aero bars on a pre-2014 Trek Speed Concept. To get a proper bike fit, you need to buy a riser kit for adjusting the height of the aerobars. But the riser kit is expensive and older parts are difficult to find. I designed these 10mm risers to dial in my fit before investing in aluminum parts without buying a full kit.
You could use the plastic risers with high infill to ride on an indoor trainer, but I think it is safer to ride outdoors on metal parts. I might try printing these in PETG with 100% infill and test using a torque wrench to see if it can take the stress of an outdoor ride.