XCAT Catamaran Phone, Cupholder and Mini-cooler System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add a cupholder, phone holder, and mini cooler to your Row&Sail XCAT Catamaran with this accessory system.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The XCAT Lacks a Cupholder or a Place to Put Your Phone or Bluetooth Speaker
I created this modular accessory system so that I could add and remove accessories as fast as it is to put the catamaran together. Designed for the Row&Sail XCAT Catamaran, you can start with a mount block that slips on to the XCAT center beam rail, then drop in whichever combination of accessories you would like.
Assembly Instructions
Use ½" Stainless Steel Flathead M6 Bolts for rust prevention. Bolts are used to secure the Top Plate to the mounting block to prevent the accessories from coming out.
Print Recommendations
- All Parts Print on Prusa Mini or Larger
- All parts rotated and exported for printing without supports.
- PETG Recommended (PLA May warp with prolonged sun exposure)
- Recommend 4-6 Perimeters
- .15-.2 Layer Height
- 15% Infill
Cupholders/Phone Holder
Built in scupper holes for quick drainage should water splash up. I like having 2 cupholders, one for a speaker and another for my favorite beverage.
New Mini Cooler!
The mini-cooler can be printed on a Prusa Mini and works great for upto 4 - 12oz cans sideways or upright. Also works great for snacks or as a general stash box. 1" Flathead M6 Bolts recommended and don't over-tighten so lid can move at tension you set.