Clockwork2 Large Gear HGX - ECAS - ERCF Filament Sensor - Filametrix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
adding filametrix filament-cutting geometry.
- Ocena
- 1 / 5
- Polubienia
- 39
- Pobrania
- 333
- Wydruki
- 1
- Wyświetlenia
- 2477
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
1-26-There is a new main body and a new cutting arm (to replace the cutting arm from filametrix). The standard cutter arm doesn't allow for enough movement to cut the filament with the larger guidler.
This uses the latest model from the 2023-07-10 release of the remix.
This is the HGX version of the model as that is what I have. I might be able to add the LGX version but I don't have an LGX to test the filametrix.
This model has been tested with my setup and I can confirm that the filament cutter will work.
11-14-2023 : adding step files for the cutting arm and hgx body. know that the body step file will require the scad from the source remix to render the filament sensor changes.
11-14-2023:
LGX stl and step added(untested)
11-15-2023: added scad files. Use these to generate final versions with sensor geometry stl versions. these all of these step stl, scad files you can generate the
11-26-2023: adding motor plate stl files (from original mod but i added them just in case the original mod changes to the new cw2 design. that way we have a matching motor plate that doesn't get lost)