1 / 4
Hydro Flask Tallboy 16oz. Cooler Cup 12oz. Can Spacer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds some height to a 12oz. soda can to allow it to be used in a Hydro Flask Tallboy 16oz. Cooler Cup.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 374
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This spacer drops into your Hydro Flask Cooler Cup to allow your 12oz. can to be used with the 16oz. cooler!
Prints in any filament without supports. Layer height, perimeter, and infill don't matter, but you can save material and print faster with less infill and perimeters, since this is a non-structural component.
