1 / 5
Customizable Pegboard Truss Shelf
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Been experimenting with the strength of truss architecture. This is a super strong shelf that is a result of some of…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 448
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 6)Remiksy (0)Kolekcje (16)Powiązane
Been experimenting with the strength of truss architecture. This is a super strong shelf that is a result of some of that experimentation. Print on the side like shown in the pictures.
Supports should only be needed for the pegboard pegs. [Overhang threshold=2, Don't support bridges=true].
Print Settings
Printer Brand:
MK3
Printer:
Prusa i3
Yes
Resolution:
0.2mm
Filament:
OVERTURE PETG
Category: Tool Holders & Boxes