Rocketdine F1 engine 1:10
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I decided to scale the model to be 1:10. Inorder to print it on my Ender 3 V2 I had to split a couple of te models.
- Ocena
- 0 / 5
- Polubienia
- 50
- Pobrania
- 242
- Wydruki
- 0
- Wyświetlenia
- 2201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I decided to scale the model to be 1:10. In order to print it on my Ender 3 V2 I had to split a couple of the STL files. The files, ‘F-1_Powerpack’ and ‘F-1_Outrigger’ have to be scaled to 227,90%. The ‘F-1_Powerpack’ STL file had a couple different parts, so depending on the printer, you have to split the model. I used the Mesh Tools extension in Cura to split the model in separate parts.
If you have an Ender 3 V2 with the default build plate clips, be careful, because the model is just big enough for the build plate. I had to move the clips to the corners in order to fit the model. ‘F-1_Nozzel_bottom_right v1’ and ‘F-1_Nozzel_bottom_left v4’ have to be rotated by 45°, otherwise they're too big.
I added the Fusion360 3MF files if you have to change anything