Rocketdine F1 engine 1:10
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I decided to scale the model to be 1:10. Inorder to print it on my Ender 3 V2 I had to split a couple of te models.
- Rating
- 0 / 5
- Likes
- 50
- Downloads
- 242
- Makes
- 0
- Views
- 2,201
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I decided to scale the model to be 1:10. In order to print it on my Ender 3 V2 I had to split a couple of the STL files. The files, ‘F-1_Powerpack’ and ‘F-1_Outrigger’ have to be scaled to 227,90%. The ‘F-1_Powerpack’ STL file had a couple different parts, so depending on the printer, you have to split the model. I used the Mesh Tools extension in Cura to split the model in separate parts.
If you have an Ender 3 V2 with the default build plate clips, be careful, because the model is just big enough for the build plate. I had to move the clips to the corners in order to fit the model. ‘F-1_Nozzel_bottom_right v1’ and ‘F-1_Nozzel_bottom_left v4’ have to be rotated by 45°, otherwise they're too big.
I added the Fusion360 3MF files if you have to change anything