FRC: Motor Controller Mount for MK4 SDS Swerve
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a ziptie attachable Spark Max Motor Controller Mount for NEO powered SDS MK4 swerve drive units.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 384
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
This mount is intended to be attach to the MK4/MK3 (top motor mounted swerve from SDS) after the drive unit is fully assembled. This will provide locations for 2 zip ties for each motor controller, 2 zip tie locations for wire management, and 3 zip tie locations for attaching to the drive unit, fastening this model to the forward #10 spacers for the motor mount plate.
I printed these with 0.6mm nozzle, PLA-CF, 4 perimeters, 20% infill on my K1 Max. Print time was 2 hours.
I added an image of the original design used in the assembly, this new design does not enclose the outer portion of the gears and belts.