Multi Disk Drive Mount - Disk Bay - 5.25 for normal Drive screws
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
What should I write here? It's a bracket to combine 5 3.5" HDDs so you can screw them into the 5 1/4" area of a case.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 724
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello :)
This is not really a remix, because a friend of mine build this new from scratch. The original design are not to use for me. You need extremly long screws for the drives, need more filament ect. I printet it for the waste. :(
Design idea from: https://www.thingiverse.com/thing:1972432
Differences to the "Original"
- You can now use normal, short drive screws (7mm head diameter)
- Holes ect. are from the 3.5" norms.
- FAN Holder are holding without nuts (30mm M3 needed, you can find a 120mm fan holder here: https://www.thingiverse.com/thing:2816653 )
- Use not the middle hole from the drives (more stable)
I slice it with S3D. Do not be surprised that one of the stls looks "broken". Its fine after you slice it! We don't fixed it, because its a design made for me, but i want to upload it for other people too.
If you want to install the fan holder in a case without screw holes for 5.25" drives and only the "middle hole" you have to remix the fan holder and make the bars of the frame longer.
You need a well calibrated printer for the screw holes! I use this HDD Box now for over 2 years without any problem in my storage pool.