Multi Disk Drive Mount - Disk Bay - 5.25 for normal Drive screws
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
What should I write here? It's a bracket to combine 5 3.5" HDDs so you can screw them into the 5 1/4" area of a case.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 61
- Makes
- 0
- Views
- 724
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello :)
This is not really a remix, because a friend of mine build this new from scratch. The original design are not to use for me. You need extremly long screws for the drives, need more filament ect. I printet it for the waste. :(
Design idea from: https://www.thingiverse.com/thing:1972432
Differences to the "Original"
- You can now use normal, short drive screws (7mm head diameter)
- Holes ect. are from the 3.5" norms.
- FAN Holder are holding without nuts (30mm M3 needed, you can find a 120mm fan holder here: https://www.thingiverse.com/thing:2816653 )
- Use not the middle hole from the drives (more stable)
I slice it with S3D. Do not be surprised that one of the stls looks "broken". Its fine after you slice it! We don't fixed it, because its a design made for me, but i want to upload it for other people too.
If you want to install the fan holder in a case without screw holes for 5.25" drives and only the "middle hole" you have to remix the fan holder and make the bars of the frame longer.
You need a well calibrated printer for the screw holes! I use this HDD Box now for over 2 years without any problem in my storage pool.