Car Cup/Mug Holder with Fire TV Holder.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapted from two separate models and merged. Requires supports under the fire TV clip to print upright.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 766
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Keep the back of the car organized! With more and more SUVs and cars coming with rear entertainment standard - an inexpensive choice to power the input is a Fire TV. The remotes tend to wind up in the cup holder jiggling around and falling out. Also the kids water bottles don't fit in the standard cup holders. Common Bluetooth game controllers (or ps5/wii pro) can sit in the cutouts as well.
Print with organic/tree supports below the fire TV base - the rest doesn't require any supports (set support angle to 70° and it should just support the base of the remote receiver).
10% infill and thick walls should yield a strong enough cup. Used PLA-ST (super tough) which is less brittle than standard PLA+.