Floating Nimitz Class Benchy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
+80% infill port of center. 120% scale. +3mm solid keel
- Ocena
- 0 / 5
- Polubienia
- 54
- Pobrania
- 244
- Wydruki
- 4
- Wyświetlenia
- 2377
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
This thing is awesome! I never actually tried printing the original but she didn't appear sea-worthy. I increased the scale to 120% to increase displacement (disclaimer: I'm not an engineer and know little about boat design. I know there are MANY factors that go into scale changes though). The superstructure also seemed like it would throw things off balance so I printed at 5% infill and added 80% infill left of the centerline as a ballast. I also added a bottom shell thickness of 3mm (probably too much) also as a ballast to keep things upright.
She sits low in the water and lists just a tad to port (too much ballast, maybe try 70% infill) but she floats well and doesn't tip easily. I know it needs some post-processing in the photos but I was more concerned with whether or not the thing would actually float or not.
After a series of vessels that only float hull-up, my son's bathtub fleet of seaworthy ships has finally begun.