Formula 1 RC Car Shells for Pocket Racers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Formula 1 RC car shells for RC Pocket Racers (As Seen on TV)
- Ocena
- 0 / 5
- Polubienia
- 50
- Pobrania
- 181
- Wydruki
- 0
- Wyświetlenia
- 1920
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
F1 themed RC car shells specifically for RC Pocket Racers through As Seen on TV. The cars are approximately 1/67 scale.
My family got several of these and we are big F1 fans and wanted to create our own races with cars that we recognized!
Print at 0.1 mm layer height for better detail on curves and use support. I was able to print all of them with lines support in Cura, but modern tree support should be much better for all of them.
The models are designed so that you can use the same screws to detach the default shell and add these ones. The screw will thread its way into the print.
You can print them in different colors for different teams or you can paint them as shown in the first picture!