1 / 3
TrackIR 5 TrackClip Pro Twist Joint Snap-On Brace
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A snap-on brace for a broken twist-joint on a TrackIR 5 TrackClip Pro antler.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 655
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A snap-on brace for the twisting joint of a TrackIR 5 TrackClip Pro antler.
I printed this with PLA, 0.4mm nozzle and 0.15mm layer height. The snap-on profiles on this tiny piece require accuracy to work properly, so try to use the most accurate printing profile you can.
To assemble:
- Align the antler twist-joint (with the O-ring) in its intended orientation,
- place both sides of the brace around the joint,
- squeeze until the two sized snap together. You're done.
