Zojirushi CD-WBC water heater replacement spring lid latch assembly
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement spring latch assembly for Zojirushi CD-WBC water boiler, would maybe fit others. Use PETG or ABS, PLA melts.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 274
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
This is a replacement for the spring latch assembly on my Zojirushi CD-WBC water boiler (which we've had for like 15 years now). The original spring degraded over time and eventually broke. This one should be printed from ABS or PETG if you can, since it's a high-temperature environment it will be sitting in (the springs will lose their spring if printed in PLA). Zojirushi sells other replacement parts here: https://www.zojirushi.com/app/spare_parts/category/water-boilers-warmers/CD-WBC30/40.
NOTE: This spring is probably compatible with other boilers. I've included a picture of the broken part as well.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
High detail (whatever that is for your slicer)
Infill:
50%+
Filament: Generic ABS
Notes:
High temp environment, print in ABS if you can (or something more temperature resilient than PLA).
Category: Kitchen & Dining