Zojirushi CD-WBC water heater replacement spring lid latch assembly
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement spring latch assembly for Zojirushi CD-WBC water boiler, would maybe fit others. Use PETG or ABS, PLA melts.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 15
- Makes
- 0
- Views
- 274
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
This is a replacement for the spring latch assembly on my Zojirushi CD-WBC water boiler (which we've had for like 15 years now). The original spring degraded over time and eventually broke. This one should be printed from ABS or PETG if you can, since it's a high-temperature environment it will be sitting in (the springs will lose their spring if printed in PLA). Zojirushi sells other replacement parts here: https://www.zojirushi.com/app/spare_parts/category/water-boilers-warmers/CD-WBC30/40.
NOTE: This spring is probably compatible with other boilers. I've included a picture of the broken part as well.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
High detail (whatever that is for your slicer)
Infill:
50%+
Filament: Generic ABS
Notes:
High temp environment, print in ABS if you can (or something more temperature resilient than PLA).
Category: Kitchen & Dining