1 / 1
Unoffical RatRig Toolhead for Cartesian IDEX printers (V-cast and IDEX V-Minion)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modification of the RatRig Toolhead for IDEX Cartesian Printers.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 142
- Wydruki
- 0
- Wyświetlenia
- 2065
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (38)Powiązane
This is a modification of the RatRig Toolhead for IDEX Cartesian printers using the V-Cast X belt pathing.
It takes the IDEX back found in EVA 3 and places it in the Ratrig Toolhead. It utilizes the original EVA 3 Belt grabbers for Cartesian style printers. It utilizes the same hardware as the ToolHead otherwise.
Currently designed for Sherpa Mini/Papilio and Rapido UHF
Warnings:
- Untested for both V-Cast and my W-Minion. Waiting on parts to test. Use at your own risk
- This current toolplate is fit for Sherpa Mini Mounting and any other extruders that use that mounting pattern (Papilio). Orbiter Variation coming soon.
- Not directly compatible with the tool-plate that comes in the RatRig Toolhead Kit. Is 6.5mm longer to allow for the second belt path
- Endstop mounts currently do not have any holes for putting in an endstop. My W-Minion uses fixed location endstops (rather than toolhead mounted) to avoid any potential inaccuracies of Multi-MCU homing.
- Currently incompatible with Both Toolboard mounts from RatRig's version. Coming Soon!
- V-cast users note My minion IDEX has the left head as primary and is the rear most X belt, which is different than the V-Cast. Switching the CAD around is available upon request. Contact me on the RatRig Discord.