Christmas Paper Roll Cutter with Blade recess
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was a great upload but I found that the blade would not sit flush with the plastic. Added a 1mm blade notch and STP
- Ocena
- 4,133 / 5
- Polubienia
- 114
- Pobrania
- 619
- Wydruki
- 14
- Wyświetlenia
- 3812
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wrapping paper roll paper
CAD drawings available on ONSHAPE
Before you commit to printing the whole model. It is recommended that you print the much smaller Print_first_to_test_blade_fitment.stl first in order to ensure that you have the correct settings in your slicer. This will also give you practice installing the blade. A correctly printed object should have tight blade fit and it should a struggle to install. If it is too loose it could be a danger to the user. As always, use common sense when installing the blade. A small pair of needled nose pliers is recommended.