Christmas Paper Roll Cutter with Blade recess
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This was a great upload but I found that the blade would not sit flush with the plastic. Added a 1mm blade notch and STP
- Rating
- 4.133 / 5
- Likes
- 114
- Downloads
- 619
- Makes
- 14
- Views
- 3,812
- Reviews
- 15
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wrapping paper roll paper
CAD drawings available on ONSHAPE
Before you commit to printing the whole model. It is recommended that you print the much smaller Print_first_to_test_blade_fitment.stl first in order to ensure that you have the correct settings in your slicer. This will also give you practice installing the blade. A correctly printed object should have tight blade fit and it should a struggle to install. If it is too loose it could be a danger to the user. As always, use common sense when installing the blade. A small pair of needled nose pliers is recommended.