Counting matching models…
A gridfinity holder for an OLFA 112B scissors that's 5x1x6 units. It's not stackable while the scissors are in there, but there is the usual lip for stacking when empty.
Simple Gridfinity Angled Dual Scissors Holder. Angled for easy closing of storage drawer. Printed on Bambu X1C using Bambu basic blue PLA filament as pictured.
This bin can hold Monarch 511 scissors. It will probably be able to hold other scissors, but I made it for the Monarch 511 scissors. It's a pretty common shape for scissors. I have included the freecad files for it, if you want to edit it.
This DIY scissorslift model can be a great intro into engineering principles for elementary and middle schoolers (K1-K6). Besides the 3d printed parts, you need two syringes, two bamboo skewers, 8-10 inches of silicone/aquarium tubing, a…
Storage for six small scissors or forceps, wall mounted using two screws 120/80/40mm apart. Six 8mm x 25mm openings. Three sizes: 90mm x 50mm overall. 120mm x 50mm overall. 150mm x 40mm overall. Print as pictured. No supports needed.
I wanted to have a gridfinity storage for my micro-tip scissors that would fit in my drawer. I originally wanted them to lay flat, but they would've been too wide to fit in a 1 wide grid, so I made them sit vertically. They still fit in…
A compact 3D printable kitchen scissors holder designed to be securely mounted with two screws. Fits most standard kitchen scissors and can be attached to a wooden knife block, wall, or other surfaces. Print Settings: Material: PLA / PETG…
You can get those craft scissor from the ACTION store for very cheap but you have only one set of handles and 7 switchable scissor blades, with my model you can have 8 full-fledged craft scissors. You can use one small and one longer…
I designed this Scissors Holder so I could store scissors right on my Prusa MK4 so it was close at hand and not lying on the table. I attached it to the top of the power supply with two 3M Command Strips. I printed it in PLA with supports…
This is scaled to use the full build plate of a Sovol Sv08 Max. Should scale down great to fit other printers. The center button is designed to glue in. I used doubke back tape to wall mount.
A 3d-model of the giant scissors used by Riyo from the anime Gachiakuta. The model is designed with a hinge so it can be opened and closed after assembly.
4x1 Gridfinity organizer for small nail scissors. I had no space to put scissors for my child and ours. So I made this small and i think space efficient scissors organizer. It has lip for finger and its 40mm height. I can make other ones…
A practical yarn bowl designed to keep your yarn from rolling away while knitting or crocheting. The smooth spiral slot feeds yarn effortlessly , and side holes hold knitting needles or scissors to keep your workspace organized. The model…
A practical yarn bowl designed to keep your yarn from rolling away while knitting or crocheting. The smooth spiral slot feeds yarn effortlessly , and side holes hold knitting needles or scissors to keep your workspace organized. The model…
Pegboard holder for Park SZR-1 scissors. Holds scissors by the blades and angles them away from the wall slightly. Designed to be quick and easy to grab as well as return. Working at a shop, I discovered that I really liked the Park Tool…
Find original holder really useful, but in my case it just fall off to often. Remixed it just in slicer, using official files from here: https://multibuild.io/parts/remixing-files?category=other
Larger scissors handle broke after I dropped them on kitchen floor. I didn't want to throw away functional scissors, fortunately I got right tool in my disposal! Damage assessment I took a photos of broken handle from different angles and…
Simple holder for small scissors so you never lose them again when you need them. Needs 1 hollow insert for mounting
This 3D Printable Scissors, as you might be wondering, does cut paper, as shown in one of the pictures that I have uploaded. But not close to as well as a real Scissors would. However, I made it as realistic as I could. I hope you enjoy…
This sheath fits the small scissors which are included with the Hamilton Beach can opener shown in the photos. No additional print supports are required, as it has an inbuilt breakaway support (shown in red within the last photo) which…
Here is a knife and scissors sharpener. This version enhances the gimbal. A linear bearing (LM10UU) is now holding the aluminium rod. No more play, motion is smooth and perfect. All the other parts of this sharpener are strictly the same.…
Holder to mount scissors or pliers to Honeycomb Storage Wall. Designed to fit with the original inserts and covers for a nice look. Based on the original “box” design from HSW. I made 2 versions so you can use either M4 or empty inserts.…
Overview A parametric re-imaging of Horacio 's excellent HSW Cutter Holder which allows you to fully customize the inner dimensions (height/width/depth) of the holder, choose the variant style and the number of slots, and pick the…
Printer: Ender 3v2 Print settings: Filament-PLA Infill-40% Layer height-0.12
2026 Update: I tapered the Peg so that the further you push it in, the tighter it becomes. A very straight forward scissors hook for your Honeycomb Storage Wall. It's easy to print and uses very little material, and it fits into a hollow…
Cake topper - scissors / Ozdoba na dort - nůžky
these scissors can create perfect snow balls out in the snow.
When the case to your Gingher Scissors break, or your lose it, you can print another one!
Element of the switch of the combustion engine Tanaka THT210S
DISCLAIMER: I DO NOT condone violence against another person. Furthermore this is intended as a training device to assist in making dangerous jobs a little safer. Use this model/device at your own risk in a controlled environment. This is…
Unless you lost the aluminum slider under the plastic fuse. My scissors fell right on the fuse and the plastic cracked. I recommend PET-G, 15% fill, Print settings 0.20 Speed Please show me your prints and share how you like the model.
Scissors handle for real scissors. This is a replacement for broken part. It can be customized for different scissors. Print in harder TPE/TPU which makes handle unbreakable. Use more perimeters (5) to avoid bending during use. Hard press…
Desing based on Skadis holder for double scissors by Arq , adapted for walls.
This is the first custom theme I projected. Use this to throw off your friends that think it can read your next move. Or have fun with you two using this set of dice. Disassembling the die is quite simple, just press the opposed faces of…
When I got my 3D printer, my wife askt me if I could print som protection holder for her small scissors. This scissors has very sharp tip which makes damege inside her handbag when we travel. I made this design, and she is very happy with…
I have 6 knives and 2 scissors in the kitchen and have been struggling to use and store them functionally and in a compact way. I designed a custom lid for Ikea ORDNING utensil rack to keep all of those organized, functional, and compact.…
When I saw this original design, I was inspired to do this remix. You can play original rules, or the new improved The Rock, Paper, Scissors rules: Scissors beat paper Rock beats everything Well… except for The Rock of course… in that…
Holder for scissors or any other things which fit like pliers etc. Fits in IKEA Skadis. Print Settings Printer: Tevo Tornado Rafts: No Supports: Yes Resolution: 0,2mm Infill: 20%
Schreibtisch Organisierer der auch Lineale und Schere hält. Ganz vorne ist ein Fach für Post It, hinten für Lineale. Am Boden kann man noch Filzgleiter oder Gummischeiben aufkleben, je nachdem ob er rutschen soll oder nicht. Gedruckt mit…
Sheath for Fiskars needlework scissors. Fits the 13cm size. The “fish tail” shape helps pulling the scissors out of the sheath.
https://www.amazon.com/Fanttik-C8-Nano-Rechargeable-Cardboard I printed it on my Qidi Plus 4 (0.4mm) No supports There are two sections on the lid and body where magnets can be inserted during the print. The magnets used are 3mm thick x…
Replacement for a lost lock part for my cheap no-name pruning shears. Version 2 works better than the original design. Optionally it can be secured with a small wire (diameter: 1mm). Just cut a paperclip and push it in the small hole. See…
Scissors holder for Victorinox 8.0906.16 scissors. Version with cutouts for 2 magnets 6x2mm - you need to add a pause in the slicer to be able to insert the magnets. Version without the magnets Magnets will not hold the scissors upside…
Hello! I present you with a hanger for MILWAUKEE Scissors designed to be used with Ikea Skadis board. It uses a T-Clip system designed by Line Arc Line. I used auto generated organic supports and they were enough, I also used the Gyroid…
I needed a Gridfinity bin that could store multiple pairs of scissors laying flat (my drawer is shallow so it wouldn't close if they were standing up on edge). This has been working for me. The model itself was fairly hastily assembled,…
(UPRIGHT MODEL UNTESTED) Upto a 16.5mm (width) body and a 7mm (width) tip. *I used adhesive as I did not want to drill holes*
A really simple ikea skadis accessory to hold scissors with a pitch of ~27mm
Store up to 6 pairs of scissors with this knife-block inspired organizer. The channels measure 15.8mm x 22.8mm, make sure your scissors will fit before printing! I recommend adjusting the infill and set to your desired weight. The block…
BATHROOM HELPER for Scissors, Files, Tweezers & more! (note: there are 3 different versions available!)
Easy to Print 220mm x 220mm, 2mm thick. For multi extruder printer, split into parts then select the parts for the second colour (first part in normally the base colour layer, all other parts are normally the top colour layer)
Home for Midori XS stationary that is compact but still easy to grab and use any individual tool you need. It takes up 2x1 Gridfinity Slots, perfect for desktop organisation. Printed with Bambulab PETG HF White
I use only one small scissors so the second tray I will use for small(5cm) sticky notes with barrier.
I made a Case for my Zwilling Nail Scissors because the other cases on Printables didn't fit. Because I wanted a snug fit, the scissors tip has to point up when inserting into the case. For more flexibility of the push button, I recommend…
TPU cover for an old pair of Sheffield, England made Scissors. Good for EDC. I found these scissors in the bin (trash, garbage) at my local hackspace because they had become rather loose. A few light taps (like 6) with a hammer on the…
Help me create more FREE models! If you enjoy my creations, consider becoming a supporter of my Printables club or you can buy some of my products . Your support helps me cover the costs of materials, energy, and time, allowing me to keep…
A Gridfinity Bin for the Klein 2100-7 Electrician's Scissors. I use my scissors quite often and like them available on my desk. I also don't want them to take up a lot of space on my desk so I created a 0.5 bin. A lot of work was done to…
I use my scissors quite often and like them available on my desk. I also don't want them to take up a lot of space on my desk so I created a 0.5 bin. A lot of work was done to get the clearances just right so the scissors sit easily and…
Simple TPU Sheath for Pepco / Poundland Kids Scissors. Good for Urban Every Day Carry. Print Settings… Filament: XYD TPU, Layer Height: 0.2mm, Nozzle Temperature: 200°C, Bed Temperature: Off, Supports: No, Bridging Fan Speed: 100%, NB:…
This bin can hold Monarch 511 scissors. It will probably be able to hold other scissors, but I made it for the Monarch 511 scissors. It's a pretty common shape for scissors. I have included the freecad files for it, if you want to edit it.
Why do all HSW scissors holders have the scissors laying flat? This one takes up less space and holds the handle out where you can grab it. OpenSCAD file included in case your scissors is a slightly difference size.
The handle of my scissors broke and I designed a replacment for it. First of all, change the bridge angle to 90º to avoid using supports (4th and 5th photos). I recomend to print it with 5 contours for a 0.4 nozzle , but anything…
OnShape model insert up to two 25mm x 8mm magnets use 4-4.5mm countersunk screws to mount
After using the “Leading Edge” system for a bit, I identified several improvements and features that I thought would improve ease of use and overall outcome; the platform felt too flimsy for me, and the old style threaded inserts were too…
This is a barber scissors prop I designed and printed for a local film production. In the movie, one of the main characters gets stabbed in the head with a pair of barber scissors. One arm of the scissors will be cut and will be glued…
Basic 5x3 Gridfinity tray with cutout for Wescott scissors. Be sure to check the measurements of your scissors as there are Wescott scissors that have similar colors and shapes to the set pictured that will likely not fit (the exact…
Gridfinity bin for longer stuff for scissor shaped things like forceps, that can be helpful in a garage
A DIN rail mounting bracket to hold chisels, pliers, scissors, and other such things. You will need to print two tabs for the bracket. They can be found at: They can be found at: https://www.thingiverse.com/thing:3401942 or…
spare parts for middle size scissors; Gcode contains both parts; STL and STP files contain one part - possible adapt size and hole - after changes or export to slicer duplicate part in slicer and rotate 180° (upside down).
This is designed to protect your sewing or knitting items from your snips. It should fit any snips that look like these: https://amazon.com/UCEC-xiaoquan-Scissors-Portable-Embroidery/dp/B01986EQDI
I wanted to 3d print a trophy for a rock paper scissors competition, but I couldn't find any ones I liked online. So I went ahead and designed my own and put it here as an option for anyone who is in a similar situation as I was. The…
This model is a protective sheath for inexpensive pruning scissors from AliExpress , designed to be printed in TPU for flexibility and durability . The sheath provides a safe and convenient way to store and transport your scissors,…
This model is a protective sheath for inexpensive pruning scissors from AliExpress , designed to be printed in TPU for flexibility and durability . The sheath provides a safe and convenient way to store and transport your scissors,…
This DIY scissorslift model can be a great intro into engineering principles for elementary and middle schoolers (K1-K6). Besides the 3d printed parts, you need two syringes, two bamboo skewers, 8-10 inches of silicone/aquarium tubing, a…
A nipper holder for Ikea Skadis. It's inspired by Q1's design sizes, although it is done from scratch. The universal hook is required to use it. V2: white pictures. It has decreased size and time to print. It should be printed upside-down…
This minimalist sculpture of scissors goes well with many decors. The sculpture is freestanding on a desk, shelf, cabinet, etc. Prints fast without supports.
Upgrade your barber station with this sleek and practical custom-designed tool rack , ideal for professional barbers, hairdressers, and stylists. Whether you’re working in a barbershop or managing your home setup, this tool organizer…
Share your contact info with a tap! This stylish keychain is designed for seamless NFC integration and features a bold icon with a 1mm raised design for easy AMS-free (single-extruder) printing. NFC Compatibility: Fits standard 25mm NFC…
Westcott Scissors Handle. I printed the handle at 30% infill, no support, at 210 degrees and its strong. To insert the handle I used a heating device to heat the metal part of the scissors that goes into the handle. After applying enough…
Modified using Blender Designed to fit the peglock system from StellasFun. Printed at 10% infill 0.2 m layers with Comgrow green PLA (nozzle 190, bed 60 for first few layers then 55)
A gratuitous use of filament to solve an unimportant problem, but a good opportunity to learn and practice my Fusion 360 skills at creating cutout custom Gridfinity bins for irregularly shaped tools based on photos (tip: if you can use…
Gridfinity holders for scissors and correction tape dispensers
I have a specific scissor. I could not find a fitted bin for it so I made this one from Seishin's OnShape Gridfinity Generator as a starting point. No magnets or screw holes. Link to OnShape if you want to copy and mod. Start from scratch…
Scissors Sheath that is mounted to under a desk , this covers the blade of the scissors Printed with PLA minor supports are needed at the base if printed vertically
A small and simple scissors holder for the IKEA Skadis board. This model is build on the SUMS system. Use the peg from this file: IKEA Skadis Universal Mounting System (SUMS) (incl. fusion 360 files) by JamesMayor | Download free STL…
The arms of the claw are made with the sticks used for illustrating the features of different shapes in Mathematics. Great for party games like balloon transportation - kids forming teams carrying balloons without touching them directly.…
