1 / 2
Calipers Skadis Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An IKEA Skadis mount/holder for a set of calipers
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 144
- Wydruki
- 4
- Wyświetlenia
- 566
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 4) (Komentarze: 5)Remiksy (1)Kolekcje (39)Powiązane
Description
This is a skadis mount for calipers (width of the central/display part: 31mm). Print-in-place, with supports. The mount just clips into the skadis board, and the calipers can be slid in.
Print Instructions
Any layer height should do, the model in the pictures was printed with a 0.6mm nozzle, 0.3mm layer height. Do enable support material. The model is meant to be printed upside down for better stability & to limit the amount of support material needed.
