Curvy LED Remote holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Someone asked me to print a LED-Remote Holder, the designs I found were "too simple" for me.
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 20
- Wydruki
- 1
- Wyświetlenia
- 88
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Someone asked me to print a LED-Remote Holder, the designs I found were "too simple" for me, so I created this "curvy" one with flextures.
Printed the one in the pictures in white PET-G.
You can use doublesided adhesive or two 3mm countersunk screws to fix it.
IMPORTANT NOTE!
This model was designed for a remote 85x40x7mm, please keep these numbers in mind and scale the model accordingly in your slicer.
Found the flexture-arms need a lillypad support for better adhesion.
The model isn't easy to support, I chose to use mesh-supports with rectangular overlapping pattern for stabilty.
Supports were hard to remove, so may use a dissimilar material for the support-interfacelayer.