HSW Air Purifier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Air Purifier for your HSW
- Ocena
- 5 / 5
- Polubienia
- 67
- Pobrania
- 111
- Wydruki
- 1
- Wyświetlenia
- 1748
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I need an air purifier for my small office so I remixed this to mount to my HSW wall. This model uses a 120mm computer fan and 4 4mm screws with nuts and washers.
Amazon has various very cheap 120mm fans that you can use. You will just need a 12v power supply or a buck converter 24v to 12v and you can run it off your printer.
This was made for a 3.75" hepa filter, but I had a bunch of active charcoal filter so I cut it to fit inside. This is the filter it was designed for but there are many that will work including some auto filters - https://a.co/d/9ZXaNeN
I printed at 20% infill 3 walls 4 bottom layers 4 top layers with PLA+ no supports needed except on the HSW mounts on mounting plate.