HSW Air Purifier
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Air Purifier for your HSW
- Rating
- 5 / 5
- Likes
- 67
- Downloads
- 111
- Makes
- 1
- Views
- 1,748
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I need an air purifier for my small office so I remixed this to mount to my HSW wall. This model uses a 120mm computer fan and 4 4mm screws with nuts and washers.
Amazon has various very cheap 120mm fans that you can use. You will just need a 12v power supply or a buck converter 24v to 12v and you can run it off your printer.
This was made for a 3.75" hepa filter, but I had a bunch of active charcoal filter so I cut it to fit inside. This is the filter it was designed for but there are many that will work including some auto filters - https://a.co/d/9ZXaNeN
I printed at 20% infill 3 walls 4 bottom layers 4 top layers with PLA+ no supports needed except on the HSW mounts on mounting plate.