1 / 2
Honeycomb Wall Makita Battery Charger Holder (DC10WB)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used to hold Makita DC10WB battery charger
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 548
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (17)Powiązane
This is intended to be used with the honeycomb storage wall
The model has an opening for saving filament and inserting the DC10WB battery. Included is a screenshot of the print orientation I used with organic supports.
These are the print settings I used:
Layer Height : 0.3 mm
Supports : Yes (organic), 10° overhang
Material : PLA