1 / 2
Ikea Skadis Drill Holder for Small 1/8 inch Drills — zdjęcie 1
1 / 2

Ikea Skadis Drill Holder for Small 1/8 inch Drills

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Just a holder for small drills with 1/8 inch shaft, made with OpenSCAD

Ocena
0 / 5
Polubienia
18
Pobrania
56
Wydruki
1
Wyświetlenia
444
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

This is a simple holder for drill bits with a shaft of 1/8 inch with a drill diameter from 0.3mm to 1.2mm. I use them with my milling machine, you can find them easily at the common online shops. The holder is designed with OpenSCAD (file included).

The prebuild stl - versions are made to mount the holder with one hook at the right side or with two hooks at the back. I also made a version for the T-Nut system from 6d6178 for T-Nuts with M2 or M3 screws. You may use the nuts from there or any other remixes, for example my remix of the nuts. 

Also included are all versions with or without marking of the drill diameter and a standalone version without hooks.

Tagi