Headphone-Tableholder (22mm tablethickness)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Do you have a pair of headphones lying around on your desk and taking up space? This might help you!
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 33
- Wydruki
- 1
- Wyświetlenia
- 279
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
With this print, you are able to hang your headphones from the side of your desk. Your desk has to have a thickness of 22mm.
For me, this was more of a test-project trying to understand topology optimization. The structure you can see from the side was created by the optimization algorithm. But then I thought: It would probably look cool, if I create some organic looking holes in the print. So I did it.
This print can be printed completely without support structures, when oriented correctly on the printbed (the part where the table would be oriented upwards; the stl-file should be oriented correctly).
I used Prusament PETG, a layer-height of 0.15mm and 4 perimeters.