Headphone-Tableholder (22mm tablethickness)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.37 – €2.90 net (excluding VAT)
For file: Headphones Holder Topology OptimizedV2_0.15mm_PETG_MK3S_3h24m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.63 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 3.41 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Do you have a pair of headphones lying around on your desk and taking up space? This might help you!
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 33
- Makes
- 1
- Views
- 279
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
With this print, you are able to hang your headphones from the side of your desk. Your desk has to have a thickness of 22mm.
For me, this was more of a test-project trying to understand topology optimization. The structure you can see from the side was created by the optimization algorithm. But then I thought: It would probably look cool, if I create some organic looking holes in the print. So I did it.
This print can be printed completely without support structures, when oriented correctly on the printbed (the part where the table would be oriented upwards; the stl-file should be oriented correctly).
I used Prusament PETG, a layer-height of 0.15mm and 4 perimeters.