Temperature probe holder for CAM monitoring system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount to hold PT1000 thermistor probes by Connected Automated Monitoring (CAM) formerly known as Checkit or Tutela.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A mount to hold PT1000 thermistor probes by Connected Automated Monitoring (CAM) formerly known as Checkit or Tutela. Three slots for attaching by zip tie or can be used with mounting tape etc depending on temperature and conditions. Avoids interference with temperature readings from contact with interior surfaces and makes it easier to take the probe in and out for calibration or maintenance.
Example printed at 0.2mm quality using PETG but can probably be done with a big range of settings. No supports needed. The cable channel end can get a bit tight if there's any blobs during printing but easy to open out as part of cleanup if needed.