3D Print Dust Collector for Drilling and Cutting updated vac hose 2.5"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A vac-assisted dust collector attachment that can be printed without supports. Remixed to fit 2.5" vac hoses.
- Ocena
- 0 / 5
- Polubienia
- 51
- Pobrania
- 198
- Wydruki
- 0
- Wyświetlenia
- 1807
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I would recommend printing it with 5-10% infill to keep the weight down.
With a 5% infill it weighs the same as the Air tip (~0.7 lbs) and suctions
really tightly to cast concrete, plywood, and drywall. The top of the
collector and base should be face down on the bed as shown in the
pictures. I divided the collector and base into two pieces to accommodate
smaller print beds but I recommend printing it in one piece for ease if you
can fit it on your bed. I fit the whole thing easily on my Bambu X1.
The TPU gasket should be printed with a 5-10% infill to allow it to be
spongy enough to flex and fit to different wall textures. 3 small ridges have
been added to allow it to get even more suction to the wall. The TPU
gasket should be printed with rectilinear infill with the flat side down
towards the print bed. I have included a screenshot of my bambu settings
for the TPU.