Plant/Garden Labels with Build-in Spikes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Labels for spices or plants with colored and raised letters and built-in spikes.
- Ocena
- 0 / 5
- Polubienia
- 42
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 1285
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Labels for indicating rosemary, parsley, green onions and sage plants. They are designed in FreeCAD 0.19.1, sliced with PrusaSlicer 2.3 and printed on a PRUSA MK3S+ using PLA filament.
All 4 3MF files are pre-sliced with a stop to change filament for the colored letters.
In addition to the previous pause, the sage and green onion labels will pause printing to add a spike, as the spike is encapsulated in the label, and cannot be removed after the printing is completed; see image.
UPDATE
Where I leave outdoor temperatures can reach +90° F (+32° C) and my PLA signs got distorted by the heat!. I re-made many of the signs using PETG filaments instead of PLA.
I used the following PETG filaments:
- SUNLU Filament PETG 1.75 BLACK
- SUNLU Filament PETG 1.75 RED
- SUNLU Filament PETG 1.75 BLUE
- Polymaker PolyLite PETG 1.75mm Lime Green
- Polymaker PolyLite PETG 1.75mm Turquoise
- Polymaker PolyLite PETG 1.75mm Orange
Enjoy!