1 / 5
LMU8 Bearing Grease Packer - 20mm cap (e.g. NIGRIN)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of Tomllama's grease packer. It features a bigger screwing cap (about 20mm).
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 392
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v2.0
Hint for printing: Use some kind of support for the flat surface on the inside of the cap - at least around the hole in the center. Else the hole will not come out clean (main tunnel for the grease).