Horizonal Fishing Rod Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These simple prints are designed to be mounted on a wall or rack and store fishing rods horizontally.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 112
- Wydruki
- 0
- Wyświetlenia
- 1219
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
[Updated 7/6/2024] I recently used a cheaper filament and found the corners separating, so I have added a fillet to strenthen the tip box.
These simple prints are designed to be mounted on a wall or rack and store fishing rods horizontally. There are five pairs of STLs for 1 to 5 rods. The 5-rod version won't fit horizontally on my Ender 3 Pro, I had to print it vertically, but all of them can be printed on that size bed.
The “HandleBox” holds the rod handles. The “TipdBox” is designed to have a piece of foam pushed into it, and then slice the foam down the center of each rod slot. The tip slides snugly in there. I used a cut piece of pipe insulation I had sitting around.
The boxes are oriented “top-down” on the build plate, with the base with the screws suspended
Supports: yes
Material: PLA+ or PETG