Horizonal Fishing Rod Storage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These simple prints are designed to be mounted on a wall or rack and store fishing rods horizontally.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 112
- Makes
- 0
- Views
- 1,219
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
[Updated 7/6/2024] I recently used a cheaper filament and found the corners separating, so I have added a fillet to strenthen the tip box.
These simple prints are designed to be mounted on a wall or rack and store fishing rods horizontally. There are five pairs of STLs for 1 to 5 rods. The 5-rod version won't fit horizontally on my Ender 3 Pro, I had to print it vertically, but all of them can be printed on that size bed.
The “HandleBox” holds the rod handles. The “TipdBox” is designed to have a piece of foam pushed into it, and then slice the foam down the center of each rod slot. The tip slides snugly in there. I used a cut piece of pipe insulation I had sitting around.
The boxes are oriented “top-down” on the build plate, with the base with the screws suspended
Supports: yes
Material: PLA+ or PETG