E3P 13mm TPU Foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a basic TPU foot that to raise my Ender 3 Pro up by 13mm (1/2 in).
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a basic TPU foot that I made to raise my Ender 3 Pro up by 13mm (1/2 in). I also tested it with PLA and it does work, but it can be very snug depending on the tolerances of your machine and how well it's tuned.
Print Settings
Printer: Creality Ender 3 Pro
Rafts: No
Supports: No
Resolution: Standard (0.2mm)
Infill: 50% Gyroid
Filament: Inland - Black - TPU
Notes:
No supports are needed, if printed on its face.
Sliced in Cura, switch the filament type to Generic TPU 95A.
Additional Settings
230/0 (YES the bed heater is set to 0)
Printer Speed:25mm/s
3 Walls
If printing in PLA, use whatever you would normally.