E3P 13mm TPU Foot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a basic TPU foot that to raise my Ender 3 Pro up by 13mm (1/2 in).
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 36
- Makes
- 0
- Views
- 246
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is a basic TPU foot that I made to raise my Ender 3 Pro up by 13mm (1/2 in). I also tested it with PLA and it does work, but it can be very snug depending on the tolerances of your machine and how well it's tuned.
Print Settings
Printer: Creality Ender 3 Pro
Rafts: No
Supports: No
Resolution: Standard (0.2mm)
Infill: 50% Gyroid
Filament: Inland - Black - TPU
Notes:
No supports are needed, if printed on its face.
Sliced in Cura, switch the filament type to Generic TPU 95A.
Additional Settings
230/0 (YES the bed heater is set to 0)
Printer Speed:25mm/s
3 Walls
If printing in PLA, use whatever you would normally.