Jack Stand Wall Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for jack stands of various sizes
- Ocena
- 5 / 5
- Polubienia
- 78
- Pobrania
- 325
- Wydruki
- 2
- Wyświetlenia
- 2168
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
COURTESY OF REESEALLEN
Hang jack stands from the wall and free up shelf/floor space.
Multiple lengths are available. See the CAD screenshot, circled dimension.
The hole is sized for a #8 standard flat head screw which are widely available in the US. I should note that US flat head screws typically have an 82 degree angle while metric screws typically have a 90 degree angle, so if you use an M4 flat-head screw it will only contact around the very edge of the head. An M4 button-head or socket-head screw with a washer would be a better option if you are outside the US and don't want to modify the model to accept a flat head metric screw. In any case, make sure the screws you buy are long enough to go through the part, the drywall, and at least 3/4" (19 mm) into the stud.
PRINT SETTINGS:
PETG
0.24 mm layer height
4 walls
25% gyroid
no brim unless you have adhesion issues