NeoPixel LED lamp project
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NeoPixel lamp project with Arduino Nano.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 354
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Small project with Arduino Nano, Touch Button and NeoPixel or other LEDs.
Print Instructions
Print the “Bottom” and the “Cover” with the filament of your choice.
Print the “Top” with clear or translucent filament to let the LEDs shine through.
Filament type: PLA or PETG
Layer height: 0.16mm or 0.2mm
Support: no
Assembly Instructions
Put Arduino Nano in bottom part.
Put touch button in cover part. Use a drop of glue (e.g. hot glue) for fixation if necessary.
Solder wires between Arduino, touch button and NeoPixel.
Put Neopixels or other LEDs in top part.
Use 2x M2x16 screws to assemble bottom with cover and top.
You can use M2 threaded bushing / melting nut in the top part.
Put your software on the Arduino.
Options
Design your own top parts.
Use other types of button, drill a hole for it if necessary.
Use microcontroller with WiFi.
Needed Material
- Arduino Nano
- NeoPixel: e.g. jewel with 7 RGB WS2812
- Screws: 2x M2+16
- Thread insert (optional): 2x M2 melting nut
- Touch Button: Search for “touch button arduino” on ebay, aliExpress, Amazon, …