Voron 0 1515 clipable LED Carrier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is a clipable LED carrier for Makerbeam XL 1515 extrusion
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 127
- Wydruki
- 2
- Wyświetlenia
- 799
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
If you like me parts, you can also support me here: https://buymeacoffee.com/andretheengineer :)
this is a carrier, that you can simply clip into 1515 extrusions found on Voron 0 for example.
i made 2 lengths 60mm and 120mm. you should be okay to scale it in Z. print it upright with or without brim.
the face of the LEDs is 30° angeled. you can put in Neopixel cob lightsor any Led strip, that is 10mm wide.
i modified a github model i found, because it didnt quite fit the way i wanted and it was only glue on, which doesnt work that well in my experience.