candelabra moon base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified base to fit a different type of candelabra socket
- Ocena
- 3 / 5
- Polubienia
- 15
- Pobrania
- 77
- Wydruki
- 1
- Wyświetlenia
- 720
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really liked the lithophane moon but had to scale it down to 80% to fit my printer bed. I also used a different candelabra base so I modified the original design.
You can print this model at 100% and then print the original moon at 80% and it will fit together.
I found the base to be a little loose so I took a heat gun and warmed up the “tabs” and gently bent them slightly upward which made it tighter and hold the base well into the moon lamp.
I used LED bulbs and they do not get hot and I keep them on 24/7
Candelabra base sockets (solder to connector/switch of choice)