candelabra moon base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified base to fit a different type of candelabra socket
- Rating
- 3 / 5
- Likes
- 15
- Downloads
- 77
- Makes
- 1
- Views
- 720
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I really liked the lithophane moon but had to scale it down to 80% to fit my printer bed. I also used a different candelabra base so I modified the original design.
You can print this model at 100% and then print the original moon at 80% and it will fit together.
I found the base to be a little loose so I took a heat gun and warmed up the “tabs” and gently bent them slightly upward which made it tighter and hold the base well into the moon lamp.
I used LED bulbs and they do not get hot and I keep them on 24/7
Candelabra base sockets (solder to connector/switch of choice)