Yeti 14oz mug Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made this to fit the T-slot rail on my kayak to hold my yeti mug and my phone.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 654
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
A quick model for the 14oz yeti mug and a phone holder that can be used to fit onto any t-slot rail. I used ¼-20x ½" socket caps, although the socket caps stick up slightly but no damage was done to my yeti. The phone holder has drain holes and I left the center one open as a drain hole as well.
I printed mine with Prusament PETG and it has held up nicely throughout the season.
Revision 4 now has thicker walls for added rigidity.
Revision 3 has taller sides so the phone is covered a bit more.
Revision 1 has shorter sides for the phone holder but is easier to access.