Bandsaw tool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My new WEN 9 inch bandsaw came with some small tools so I made a holder for them
- Ocena
- 4 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 231
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
My new WEN 9 inch bandsaw came with some small tools that are needed when you change blades or fine tune the settings. There is no place on the machine to store these tools and I most certainly will lose them in no time. It turns out the column on the left side of the machine is hollow and comes with a plastic cap on top. I created a new cap with slots for the wrench, two allen keys and even a spot for the miter gauge. It's a snug fit so the tools should not vibrate out.
I created two versions, one with a hook to hold spare blades and one without the hook.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Resolution:
.2mm
Infill:
20%
Filament: generic PLA orange
Category: Tool Holders & Boxes