Techno error flower pot - thicker option
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small tweak of the flower pot that can be used directly for suculents. internal shape is simple cylinder.
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 199
- Wydruki
- 1
- Wyświetlenia
- 663
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Hi, if you open the .m3f file in Prusa Slicer, you will get the original design and two cylinders. Current setting is that internal diameter is 114mm.
The negative-volume cylinder defines internal dimensions. If you scale it, ensure it does not sit on the bed - z position defines thiskness of the bottom. (Currently 2 mm).
The second cylinder (positive volume - wall thickness ensurer) is slightly larger in x and y dimensions. Difference in dimensions defines minimal wall thickness. For instance is x and y sizes are 0.9mm more than negative-volume cylinder, then one perimeter with 0.4mm nozzle is ensured, this is bare minimal.
- diff of 1.8mm w/ 0.4mm nozzle => 2 perimeters
- diff of 2.7mm w/ 0.4mm nozzle => 3 perimeters
- diff of 1.3mm w/ 0.6mm nozzle => 1 perimeter
- diff of 2.6mm w/ 0.6mm nozzle => 2 perimeter
Take this table as general guide and use your experience with your printer - you may need to adjust it differently. Best is to review slicer results.
Enjoy!