Monstertech TPU Bumper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My little kid always bumps his head on my chair when he plays around so I designed TPU bumpers to prevent accidents.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 230
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Monstertech offers HOTAS mounts for Seats so you can quickly add your HOTAS system to your chair without permanently mounting it.
Unfortunately, the holder-brackets stick out pretty far and you have to be careful with your furniture and kids / pets.
I designed TPU Bumpers to slide over them and lock in place with a little nubbin.
To remove, just squeeze the bumper and wiggle it.
Print times are pretty hefty due to TPU speed limits.
Printsettings:
- Print orientation: Upright
- Speeds: 30-50mm/s
- 5-10% Gyroid Infill
- 2-3 Walls
The Print time is approx. 5 hours per piece with slow TPU speeds on the X1C.
With the new High-Speed TPU it should be reduced dramatically.