Monstertech TPU Bumper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My little kid always bumps his head on my chair when he plays around so I designed TPU bumpers to prevent accidents.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 19
- Makes
- 0
- Views
- 230
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Monstertech offers HOTAS mounts for Seats so you can quickly add your HOTAS system to your chair without permanently mounting it.
Unfortunately, the holder-brackets stick out pretty far and you have to be careful with your furniture and kids / pets.
I designed TPU Bumpers to slide over them and lock in place with a little nubbin.
To remove, just squeeze the bumper and wiggle it.
Print times are pretty hefty due to TPU speed limits.
Printsettings:
- Print orientation: Upright
- Speeds: 30-50mm/s
- 5-10% Gyroid Infill
- 2-3 Walls
The Print time is approx. 5 hours per piece with slow TPU speeds on the X1C.
With the new High-Speed TPU it should be reduced dramatically.