1 / 4
Hasselblad 500 body viewfinder crop mask for CFV II 50C — zdjęcie 1
1 / 4

Hasselblad 500 body viewfinder crop mask for CFV II 50C

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A set of viewfinder masks for Hasselblad analog body to use with digital back CFV II 50C.

Ocena
5 / 5
Polubienia
25
Pobrania
307
Wydruki
2
Wyświetlenia
1606
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I wish Hasselblad made a better viewfinder mask for shooting with 907x CFV II 50C digital back on old analog body so I made mine. There are several similar models available here and there, but these are complete set of all crop formats including several “multicrop” layouts.

The masks fit the camera viewfinder very nicely without any wiggle and provide a description of every crop type. Also, there is a hidden notch in the outer frame to help with removing the mask from the camera with your finger nail. 

As reported in comments, there might be an issue with the height or length of the mask in certain camera versions. This one is tested on 501CM and 2000FCW. If you experience this issue, you might want to scale the model in the appropriate axis by few % for better fit. Thanks @Patrick_2258977 for tip.

In addition, I have added slightly modified model of print-in-place parametric box made by @shiko to store the masks in the most convenient way.

Let me know if you desire any kind of modification, I'll be happy to help. I can provide my own printing, if anyone wants (I don't expect high demand given the camera type niche).

Print tips

  1. Model is fine tuned for 0.15 mm layer height print and 0.4 mm nozzle. Don't use different values, it might mess up with the lettering and overal mask thickness. 

  2. You may want to switch the filament colour after the first 3 layers for nice effect on lettering.

  3. Scale the model in Z axis by 2-3% if the mask is too high for you camera model.

Tagi