Liczymy pasujące modele…
Elevate your recording and gaming setup with my Customizable 3D printable microphone arm with adjustable joints and easy assembly for improved gaming and audio setups. Adjustable The joints can be adjusted in 10 degree intervals where…
BACKGROUND: The QMX , (tr)uSDX and Elecraft KX2 and KX3 are fantastic portable radios, but the microphone for the KX2/KX3 is relatively big and heavy, and there really is no good mic option for the (tr)uSDX. So, I decided to design one.…
This is designed specifically for a Dell Optiplex 7060 MicroPC, though it may be possible that some similar era Dell micros may fit in here too (the model in picture has an i7-8700 for a hint of its age). As you can see, I got a little…
Kids love to sing and these toy microphones can add to the fun. Another optional for use is the tried and true "whomever holds the microphone gets to speak, while others listen". And of course, there's always the classic "drop the mic"…
Ein Mikrofon mit Ständer und abschraubbarem Kopf zum Verschenken von Eventgutscheinen. A microphone with stand and unscrewable head for giving away event vouchers. Print instructions Gedruckt in PLA mit 0,2mm Schichtstärke. Länge: ca.…
This is a low-profile microphone arm that swivels underneath a monitor to save space. I've been using this for over 3 months, and it's been rock-solid. Fully 3D printed with no supports! All printed hardware can be swapped with M10 x 30mm…
Use it as props, award or a simple decoration. For other half load one more model aside and miror it. Glue after its done. Print flat side down, no support, lightning infill for faster printing and material saving.
Hey all! This is my custom Microphone stand I designed as I bought a microphone that came without a boom or a stand. It should fit most standard shock mounts (refer to the second picture). Do print with a fairly high infill for strength,…
Mount (clip) for Shure SM58 and other compatible microphones. With 3/8-16" mount (for standard microphone stand) and 1/4-20" mount (for photo stands/tripods). Can be used with original screw and nut as well as any part can be used instead…
BIQU Microprobe STL and STEP file. Found it on the BTT GitHub.
Update 5/17: Added a bottom with a GoPro mount. With a couple GoPro arms you should be able to use my Yeti pop filter with this mic holder: https://www.thingiverse.com/thing:4234982 . Update 5/3: Added step file and 1/4" threaded bottom.…
A replacement desk clamp for scissor-arm microphone boom stands. If the original clamp on your mic arm broke or went missing, this is a printable substitute. The hole for the mic arm post measures 13mm. Files included Mic Stand Clamp…
Roblox Grow a Garden-inspired fruit & veggie set: tomato, cocoa, bell pepper, apple, mango
Female 3/8"-16 to Male 1/4"-20 adapter. Designed to convert desk microphone boom arm to use standard camera tripod attachments. Print on side to prevent shearing when threading on 1/4" side. Suggest 100% infill for strength. Print…
This is a 3/8 inch female to male 5/8 inch microphone stand adapter. It fits a ton of different stands and microphones. It includes a flat screw like cutout so you can easily tighten it. The images show the adapter on the Blue Snowball…
No one wants to be left out at karaoke time, including Lucky 13! Based on @DJMac_255353 's Toy Microphone. Colors loosely based on a Shure SM58 with a black stripe for contrast. Brim recommended. Some post processing may be required. My…
If you're doing a video shoot that represents a brand and you're using a handheld mic, you can display the logos on your microphone using this microphone flag. The interior of the block is filled with foam to help it grip the microphone…
This is a replacement part based on the WindTech CC-6 Mic Stand Cable Clip for microphone stands and boom poles. My brother has a set of these from Sweetwater they work great. Eventually a couple ended up breaking, so I designed a…
Cool 3D printed retro microphone table lamp — a vintage-style night light for music lovers, studio desk or bar decor. Fits the tBulb B dimmable USB LED module. id : be10031a10 size : 138X127X298 mm files : 7 pieces : 10 maximum size of…
I modified my original Generic Streaming Microphone Shock Mount Reference to improve its printability. Try it for yourself and throw a like if you think it will work well for you. Changes include: Tapered posts, holes, and elastic slots…
This is a mic handle designed to fit a DJI Mic wireless transmitter module. The handle holds the transmitter unit securely by the clip and is designed to fit a foam windshield with a 40mm opening. From experimenting, the cheaper…
🇬🇷 Καλως ηρθες στην ΕΛΛΑΔΑ! Welcome to Greece! Print The Parthenon in its true setting at the Acropolis of Athens with intricate detail! This model was developed in collaboration with Micropolitan , combining the MiniWorld3D detailed…
The VOID9 Macropad is a handwired 3x3 pad that uses a Pro Micro as a controller. Two versions for the top case are included, one of them is flat, the other has a 4mm fillet. There are two versions for the bottom case as well, a flat one,…
This microphone prop / toy was designed to accomodate costumes that need a hint of color to match. This microphone prints in multiple parts so that each section can be in the color of choice. The microphone connects via a twist & lock…
Alastor from the animated show Hazbin Hotel has a staff (cane? wand?) with a microphone on top that helps him channel his powers. After looking at various angles of it, it seemed like a not-quite-screen-accurate interpretation of it would…
Welcome! The Fifne AM8T mic is a great budget option. I've been using mine for a while, and at the 60 USD price point with a boom arm, is a really good budget option. But one thing was wrong with it, no shock mount. The mic is connected…
If it's a microphone stand you're searching for, you came to the right place! A bit of parts salvaged from : Stand : https://www.thingiverse.com/thing:1993382 (has some nice plugins for the stand if you're into that kind of thing) SM57…
A simple standard microphone stand adapter from 3/8" to 5/8". Made with fusion360.
Microphone stand adapter 5/8 inch female 3/8 inch male no support needed
mic cable clips for boom arm (cable:5 mm, arm:10*10 mm) Print Settings Printer Brand: Prusa Printer: I3 MK3S Resolution: 0.2 mm Filament: Prusament PLA Category: Audio
Update: Added 3 versions - One with a hole for the STEMMA port, One with a hole for the STEMMA and Reset, and a last one that has space for a Pimoroni trackball. This is a form fitting case I designed for the Adafruit Macropad. Its…
This is a simple adapter so that the Biqu Microprobe can be mounted on the mounting points made for a CR Touch or a BL Touch. It is essentially an extender, since the microprobe is significantly smaller in height than the usual suspects.…
UPDATES : 29/09/2024 : Vial file “big_num_vial.uf2” added. ____________________________________________________________________ Context: BigNum is part of a series of projects I've recently started, all focused on custom mechanical…
The base part that clips onto the Samson G-Track Pro microphone can be found here: https://www.printables.com/model/219694-samson-g-track-pro-pop-filter Otherwise, you can remix your own adapter base for your microphone. I have a clunky…
"Dusty Crophopper: A Tale of Dreams and Determination" Dusty Crophopper, the beloved crop-dusting plane from Disney's "Planes," teaches audiences big lessons in a short time. Despite humble beginnings, Dusty's determination to race with…
This is a sparepart for the Vtech Kidi Super Star DJ Studio.
A little handwired macropad that you can take anywhere! Includes a rotary encoder slot perfect for volume control, page scrolling, and more. Note: EC11 rotary encoder is free floating therefore you may want to glue your encoder in or…
My daughter requested a microphone for her pop star costume and I decided to design one for her. I sliced the top grille in Slic3r and printed without any support. As I wanted to do a color change for the shaft and bottom grille, I sliced…
Anti-Roll Collar compatible with Shure Microphone. We could not find the original to purchase. Was designed around the Shure ULXD2 but may fit other models Works with rigid filament, but may be better with a flexible filament.…
To adapt our BIQU Hurakan to use H2 V2S REVO we need to adapt BIQU MicroProbe sensor using this universal BIQU MicroProbe for all H2 extruders series. Klipper configuration changes: [probe] ... x_offset: 4 y_offset: -32 ... [safe_z_home]…
no remix, but I think it is easier to find that way. I didn't have a 5/8" screw and didn't know where to get one. If my screw is to long just scale up the ring.
This is a microphone flag to be used with regular handheld interview microphones. I have tested it with my Shure Beta 58A microphones, but it should easily fit many other vocal/interview mics. The OpenSCAD file is made so that it is easy…
A riding crop for the lovely horse(s) in your life. Complete with an octopus arm inlay design. I printed this in Wood PLA and added a mahogany stain, rub-n-buff on the inlay, and finished it off with a gloss clearcoat. For the leather,…
Shure sm57/58 Microphone Desk Clamp Stand + Headphone holder. Don't forget to print the screw that is a separate file.
Designed to hold 4 wireless microphones in each holder. Modeled around the Phenyx Pro Wireless Microphone. Print top down and no supports are needed.
Realistic model of Airbus A320 cockpit Microphone which mounts at rear of sidestick console. Print all body and mesh parts in black PLA, 100% infill for strength and solid feel. Model is split into parts so it can be printed without…
Drop in and Adjustable only change I had to make was my X had to be Changed to -35 from the default -28. Just be sure to double check! Will need 2 x M2.5 x 10 and 2 M2.5 nuts for mounting.
I recommend printing it in PETG The first version closes relatively flat at the top (e.g. if the party box is to be pushed under a table), the second version “mic higher” places the microphones higher. It would be nice if you post your…
Microphone stand for Audio-Technica ATR2500-USB. Will probably fit other brands as well, since it simply screws on (16mm). This is the first version, and can definitely do with some improvements, happy to hear some of your constructive…
drum microphone holder Layer height - 0,2 0,4mm nozzle Filament PLA or Petg printing with support
An isolating shock mount for the miniDSP UMIK-1 measurement microphone. The mount is intended to be installed on a monopod, tripod or selfie stick with a ¼" or 3/8" screw. It isolates the microphone from a broad range of vibrations, which…
The original design was developed to be machined out of aluminium. It was discovered that the test print works just fine as a mount. Redesigned the mount to have a higher safety factor at the stress concentration. Recommended to slice…
You can use a z offset like -2.30, it's a standard for this braket. The firmware is already compiled and you can flash the printer easy, dont forgot to flash the display, it's easy. all files is included. The model it's easy to print, i…
Simple BLTouch/3DTouch/MicroProbe mount for your BIQU H2 V2S lite extruder. Assembly: Just use two washers between the fan and the mount (as seen in pictures) BL/3D Touch Offset: x: -32 y: +2 MicroProbe Offset: x: -29 y: +2 Printed…
A sturdy part that clamps with two M6 screws to the pole of the monitor stand arm 35.5mm pole and can hold one of those boom arms for a microphone that looks like the Pixar lamp
Can be printed in one or 2 parts. Printed on 0.16mm layer on a X1C.
Printed this one with 0.25mm nozzle for better detail and function. When putting on microphone is need to be very careful because is very tiny thing so you could damage it. After putting on microphone it works as original! If you like my…
A modular stand for inexpensive, generic micropipettes. I had to glue the left leg to the first holder, as it wasn't as snug as I wanted, but that's just due to the print orientation of the legs. The rest of the “blocks” holds perfectly…
If you need a microphone stand, this microphone stand is a good choice ( This microphone stand is made for microphones with a diameter of 4.5 cm ) Best results found to be using a default settings: Layer height - 0,2 or 0,1 0,4mm nozzle…
This Voron StealthBurner Mount for the Biqu / BTT MicroProbe is designed to allow the MicroProbe to be mounted in the same location is an inductive probe. As a result no X offset is needed and the probe is well protected in the event of a…
Microphone to camera screw adapter This adapter allows to screw a microphone mount onto a common camera thread. (3/8 - 16 UNC to 1/4 - 20 UNC) Feel free to support my work and leave a tip.
The VOID16 Macropad is a handwired 4x4 pad that uses a Pro Micro as a controller. Bill of materials Redux 6 x M2x3x3.5 OD heat inserts ( aliexpress ) 4 x M2x10 Allen head screws ( aliexpress ) 2 x M2x6 Countersunk screws ( aliexpress )…
Acropolis of Athens, reduced to a small, clean object that keeps its main shape and character. Part of the Mini World collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…
I modified the holes to work perfectly with 2 M3 bolts and mount flush. For the base, i used a dowel connector (depending on your printer settings, you may or may not need to slightly sand the dowel down a bit). If you use Bambu Slicer or…
Alastor the Radio Demon's microphone (from Hazbin Hotel) - Remixed @salamanders_176168 model to print with no supports needed
Remix of VOID9 macropad with 4 columns and encoder . Keycaps are remixed from one of rsheldiii Keycaps and needs support for center piece. Code for CircuitPython can be found on github: https://github.com/Karolis92/pico-macropad
Hey there, science fans! We're super stoked to share this crazy cool 3D model of a mini lab micropipette - but here's the twist - it's a keychain! This isn't just your average piece of trinket. It's got a working plunger mechanism (yep,…
Realistic recreation of the Microphone holder at the rear of A320 Sidestick Cabinet. Designed for cabinet with 5 degree slope, but would work if top was flat. Print in black PLA, 100% infill for strength. Both a complete model and a…
I had the need to mount a USB-microphone and some other accessories to my workplace table. I didn't like what I could buy on Amazon, so I made my own “c-clamp microphone boom” and called it the “Varioboom”. The project grew a bit and now…
A minimalist table stand for your microphone. This version has the same interface as the original version . The base is slightly larger and perhaps better looking. Print Settings Printer Brand: Ultimaker Printer: Ultimaker Original Rafts:…
I removed the top 2mm of the bottom so the lid would slip down just a bit so starting the threads is a little easier. Thanks PsychProd for the original!!
Requires 1 x M5x25mm bolt and nut. M5 nut need to be inserted during printing of Knob v2.stl after layer 28 (0.2 resolution).
this is a simple adapter from a crtouch/bltouch to a biqu microprobe. It uses the two m2.5x5 screws that come with the biqu microprobe and two m3x6-m3x8 screws. 4-20-2024 M2.5 screws didnt fit so i updated the design 4-20-2024 apparently…
This is the upper replacement part of a shure microphone holder. Printed with black PETG with support. The stl is a little bit messy, but slicer correct it when u load. top microphone hole diameter: 25mmm bottom microphone hole diameter:…
Length: 180mm. Six models in total. Two bar variants: 1. with 1/4-20 and 3/8-16 threads. 2. with bare holes for (1/4-20 and 3/8-16) brass inserts. Four screw variants: 1. Long screw with 3/8-16 thread. 2. Short screw with 3/8-16 thread.…
Dragon Burner remix for BIQU MicroProbe. OnShape: https://cad.onshape.com/documents/60a28a4c34972125e94cdbc3 Offsets (from OnShape): X: 32.475 mm Y: -12.468 mm
Send a mail at [email protected] to purchase the kit for 45$ it includes a build guide, schematics, code , and help via email Fill out this form with some basic info and get a discount of 10%…
An adapter that allows you to connect items that take a ¼" screw head and use it with a 5/8" screw head commonly found on microphone stands. Useful for attaching things like camera mounts or phone grips to mic stands for overhead or still…
I made this stand because of using microphones on daily basis and rolling of them on tables was terrifying! For this design you need: 4x cabinet door bumpers (10mm) 1x furniture leg soft sticker If you like my work please support me. :-)…
Hey, i designed a easy cap for the INMP441. If you want to fixate it, just use hotglue or similar. Leave a like if you like it ;)
A strong adapter to mount the HyperX QuadCast microphone horizontally. It lets you use the original nut and thumbscrew to secure it horizontally on its stand. The model I based this off had the majority of the weight resting on a very…
Hello! Here is Alastor's Microphone/Staff/Cane? from Hazbin Hotel!! Most parts have some method of joinery to make sure the fitment is correct, so assembly is very easy, just requires glue or plastiweld. I personally recommend plastiweld,…
I've added fastening for a shure sm57 (and similars) to the original model.
This Casual Woman STL captures the natural elegance of a relaxed, confident pose — blending realism, anatomy, and fashion detail. Detailed sculpt : accurate anatomy, realistic fabric folds on jeans and crop top, soft body lines, and a…
The threadings of the screws: inside ANSI UST 5/8-27 UNS outside ANSI UST 3/8-16 UNC
Modified to make front panel thinner for Yaesu mic stud. Modified to make pocket deeper to make room for rack mount screw behind mic stud. Remixed from CB/Ham Radio Mic Holder Remix II:…
A compact mounting solution for a dual 5015 fan with clear nozzle view, and use of the original metal BL Touch bracket. I found the Pudgy fan duct and really liked the look of it but found that it could be improved in some areas. Part of…
9 key + rotary encoder macropad utilizing a raspberry pi pico Instructions: https://jasongiroux.com/2023/07/16/macro-pad/ code: https://github.com/jaysongiroux/pico-macro-pad
I wish Hasselblad made a better viewfinder mask for shooting with 907x CFV II 50C digital back on old analog body so I made mine. There are several similar models available here and there, but these are complete set of all crop formats…
I have both Yaesu and Icom radios in the shack and wanted a common mount fo the microphones. This adapter modifies the Icom microphone “clip” to the “button” style found on CB and Yaesu microphones. It fits in the mic ok, a small drop of…
This is an roblox grow a garden bone blossom model. id suggest printing it with thin layers like 0.2mm
Includes small colony of Tubipora musica attached to coral
After the shockmount of my RODE VideoMicro broke, I designed a new one that could replace the original Rycote mount. Both PLA and PETG have worked well for me. The original hardware of the coldshoe mount can be used to mount the print.…
I needed a 4inch kick port for my floor tom conversion. Why pay $50+ for a plastic ring when you can print one?! Ive even added a screw so it can be removed/replaced later. It took me a couple of iterations to find a light weight and…
1. Introduction This is a remix of a remix (Scatterthought) of a good Logitech C270/C310 Focus Ring design. I just add my contribution ;) -Tighter tolerances between ring and cover. -Change the “gear” design to better grip the lens.…
This is : a support for BIQU/BTT microprobe to adapt it on the QIDI Q1 pro. a description how to install it on the printer a description of the modifications in the printer.cfg and gcode_macro.cfg files The QIDI levelling system works…
The plastic bolt was clipped on the original stand adapter, can be taken off by force. https://fifinemicrophone.com/products/fifine-k683a-type-c-usb-microphone
All parts can be printed in the given orientation. The TripodSwivelHead needs some support
Here is a simple solution to protect your microphone from shocks. I use it for a Shure SM58 whit hair ties to insulate.
I needed to connect my Razer Seiren Mini microphone to a camera tripod so I quickly made one. It took me 30 minutes to design and print this with help from these models: Mic Microphone screw thread extender. 5/8" five eigths inch. by…
