Riding Crop handle for horses or people (BDSM)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A crop handle for you to add a leather strip to.
- Ocena
- 0 / 5
- Polubienia
- 140
- Pobrania
- 489
- Wydruki
- 0
- Wyświetlenia
- 3385
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Costume Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
A riding crop for the lovely horse(s) in your life. Complete with an octopus arm inlay design.
I printed this in Wood PLA and added a mahogany stain, rub-n-buff on the inlay, and finished it off with a gloss clearcoat.
For the leather, cut to the desired length, fold in half, slide into the slot, and I used 2 small metal nails that I cut the ends off of to slide into the holes to secure the leather in place. I then used excess filament and a soldering iron to cover the holes so that the nails can't slide out.
I recommend increasing the wall count and printing with more infill around the end of the crop. This would be a good print to add weights inside the handle, but do so at your own risk.